You are currently viewing Extraordinary computer badge design

It hangs around your neck, comes with the cost of admission, and would blow away a desktop computer from the 1980’s. This is the Hackaday Superconference badge design and you can get your hands on one for the price of admission to the ultimate hardware conference.

What is inside.

Everyone through the door gets one of these badges featuring a 320 x 240 color display, a full qwerty keyboard, and limitless hacking potential! The stock firmware runs a BASIC interpreter, the CP/M operating system, and includes games and Easter Eggs. It’s a giant playground, and we want to see what you can do with this custom hardware during the three days of Supercon. Get your ticket now, then join me after the break for a demo video and plenty more info.



This badge design by Voja Antonic was premiered at the Hackaday Belgrade conference in May and is seeing an encore performance for Supercon. It looks amazing, but what you don’t realize until you have it in your hands is how much fun it is to hammer out some BASIC code on the incredibly clicky keyboard. Check out this fun figure: we ordered over 30,000 momentary switches for the assembly of these badges!

Supercon Badge screen

Supercon Badge screen animated

The badge display.

The display on the badge design is superb and provides plenty of room for highly readable text. Of course, it’s full-color and begging for some great visualizations — demoscene anyone? The badge is being assembled by Macrofab, who have also donated a portion of the assembly cost. They use red PCBs for prototypes — you’re looking at #1 of 5 — but the final solder mask will be black. In the upper right, you can see the white component with is an RGB LED controllable from inside the BASIC interpreter.

Supercon Badge chip

Supercon Badge chip2

The back side.

The hard work is happening on the back side of the badge. A PIC32MX370 microcontroller drives everything, with an SST26VF016BT flash chip for an additional 16 MB of storage — both of these chips were graciously donated for this project by Microchip.

Also on board is a speaker and amplifier circuit. That’s right, this badge plays music! You can code in BASIC or in C for three-voice audio.

Supercon Badge Expansion Board

New for Supercon is the hardware hacking breakout board. This attaches to the breakout header on the top of the badge and includes a hole for a bolt and nut. Shown here is the protoype, the final version will be black, and includes three footprints for “shitty add-ons“(SAO). If you want to make your own SAO to bring to Supercon, here’s the design spec.

Expansion features.

The expansion header includes four GPIO pins that can be controlled from the BASIC Interpreter. There are pins for I2C and UART serial broken out. The header is also used to program the badge. If you have a PICKIT, please bring it along to Supercon. You should also bring a USB to serial cable if you have one. (Not like you were going to leave home without it, right?)

We saw all kinds of things connected to this header at Hackaday Belgrade. Before lunch there was a badge up on the WiFi network which you could log into and draw on the screen from your phone’s browser. There were badges communicating via long-range radio dongles. This year we hope to see communications hacks and a lot of bling!


The firmware is designed by Jaromir Sukuba and is still in progress for this year. He began with an existing tokenizer and fleshed out the core functionality before adding in hardware-specific functionality: playing music, controling the LED, controling GPIO, writing to the screen, PEEKing and POKEing RAM locations, and more. He also added the CP/M operating system and configured the flash chip to serve as disk space for it.



We suggest you begin thinking about hacks involving:

The BASIC language
Music (look for or arrange tracks that use up to 3 voices)
Writing code (or locating existing programs) for CP/M
Driving your external hardware hacks using GPIO, I2C, or serial


The most delightful custom name badge design hack we saw at the Belgrade conference in May was a two-badge game called “Shoot My Valentine“. Each player had a little ship pointed towards the other badge, when that badge fired the lasers, you saw them travel up off the top of the screen and appear on the other player’s badge. This is the sort of awesome creativity we hope to see this year. Can anyone come up with a 4-player game?


How to make a unique badge for your company?

  1. Sign In to the
  2. Go to the Makebadge’s Name Badges section (
  3. Choose a desired template or start to create your Badge from scratch.
  4. Define a size and orientation of your Badge.
  5. Define the areas inside your badge where will be text fields, photo or a corporate logo, contact address, phones, emails e.t.c.
  6. Choose a text size, fonts, colors.
  7. Type all your text fields and set desired sizes to them.
  8. Upload a logo and photo.
  9. Check all the elements’ positions, change its places if necessary.
  10. Save your artwork.
  11. Export your Badge as a file.
  12. Print it on your home printer or in nearest Print Shop.

Leave a Reply